Solar Inverter/solar charge controller integrated

Technical Features:

1.Using the sixth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance.

It with powerful protection function for short circuit, over load and over temperature which is more safe and reliable.

It’s service life can up to 15-20 years or more. 2.Intelligentized, modularized and simple structure design, very easy and convenient for maintenance.

3.Two kinds of start mode: Step Down Voltage Start and Variable Frequency Start.

4.The output frequency 50Hz/60Hz can be set via LCD panel.

5.The output voltage can be set.

6.The DC input voltage range can be set. over-voltage point, under-voltage
recovery time all can be set via the LCD panel.

7.Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses, higher efficiency > 94%.

8.Pure sine wave output. with good transient response less than 50MS, little harmonic distortion, higher conversion efficiency and stable output voltage.

9.Low frequency transformer, which ensure the AC busbar and DC busbar are completely isolated to avoid interference, high efficiency and very little no-load loss.

10.Powerful data display and fault instruction function. LCD can display the DC input voltage, output frequency, phase voltage, phase current, AC bypass input voltage, output power KWH, time and date, temperature, fault code display.

11.Wide input voltage can be set according to customer’s requirement. Input voltage range can be selected from 100-400v or 200-600v or 400-850v. This wide voltage input off grid inverter can work without battery and solar charge controller, which save battery cost and same like with MPPT function can maximum make full use of solar power .

12.AC bypass input function optional: Battery Power Priority or AC Bypass Priority work mode can be set.

13.RS485 remote monitoring function optional

14.Solar charge controller and AC to DC battery charger built in optional for customer

15.Can be customized to customer’s specification.

16.European CE (EMC and LVD) certification, accredited by Australian CEC, ERAC energy network, meet UL1741 and CSA22.2 standard.

Model HSPIC-5000W
Battery Input
Rated Voltage(Vdc) 96V 192V
Rated current(A) 52A 26A
Input voltage range(Vdc) 86~140 172~270
Solar Input
Maximum. Input voltage of solar panels(Vdc) 176V 352V
Input strings 2
Rated charge current(A) 60A 30A
AC Output
Output Rated power 5000W
Output Rated current(A) 23A
Output voltage accuracy 220VAC±3%
Output frequency accuracy 50HZ±0.05
Waveform distortion rate(THD) ≤3%(line load)
Dynamic response(load 0~100%) 3%,≤40ms
Power factor(PF) 0.9
Efficiency ≥93%
Electrical insulation properties 2500Vac,1minute
Overload capacity 120%,10s     /   150%,1s
Protection function Input reverse polarity, under voltage, overvoltage, output over-current, short circuit, overheating etc.
Running mode Continuous running
Cooling method Fan-cooled
Short circuit protection No automatic recovery, restart machine
Work environment
Degree of protection IP45
Using altitude(m) ≤2000
Working temperature(°C) -10~+50
Storage Temperature(°C) -25~+85
Noise(dB,1meter) ≤50dB